- About Us
- Contact Us
Process of Cells from Inquiry, Samples arrangement and Testing
Thanks for pay close attention to PLB, and inquire PLB battery cells, we are very honor to service for you. In order to provide the most helpful solution to you and meet your requirement, PLB Battery built the process for you as below include the whole set process from inquiry to sampling, delivery etc. Thank you.
Comparison of lithium iron phosphate cell and lead acid battery
(1)Cycle service life: lithium iron phosphate core 1200 ~ 2000 times, lead-acid battery 500 ~ 900 times.
(2)Specific energy: 150Wh/kg lithium iron phosphate cell, 40Wh/kg lead-acid battery.
(3)Volume: the volume of the lithium iron phosphate cell is 2/3 of the volume of the lead-acid battery.
(4)Weight: the weight of lithium iron phosphate cell is light, only 1/3 ~ 1/4 of the lead-acid battery.
Advantages of lithium ion cells
(1)The voltage of polymer lithium cell is high, and the working voltage of single cell is as high as 3.7-3.8V (3.2V for lithium iron phosphate cell), which is 3 times that of Ni-CD and Ni-H cell.
(2)Large capacity, material can reach 150mAh/g above specific capacity, specific energy 3~4 times than NI-CD, 2~3 times as much as Ni-MH.
(3)Long cycle life, generally can reach more than 500 times, or even more than 1000 times, lithium iron phosphate battery cell can reach more than 2000 times.
(4)Good safety performance, no pollution, no memory effect.
(5)The rate of self-discharge was about 2% after one month of storage at room temperature, much lower than that of NI-CD and Ni-MH batteries.
(6)Fast charging and discharging, the capacity of 1C charging for 30 minutes can reach more than 80% of the nominal capacity, and now the phosphorus and iron battery can reach 90% of the nominal capacity charging in 10 minutes.
(7)Working temperature range is high, working temperature is -25~45°C, with the improvement of electrolyte and positive electrode, it is expected to be widened to -40~70°C.